It's been a week since my first Nano Meet, and I've finally found a moment to write a few words on how it went.
Saturday - - on arriving Artic made me welcome.
My car was subjected to the spy hole mod (thanks Artic & Mark), during which a lot of water was observed in the plenum. This is now dry.
Duncan kindly plugged the T4 into my car, thankfully all is well.
My n/s/r door lock and window weren't working, so I took the opportunity to strip off the door card, knowing that if I ran into difficulty I could seek help. I had brought a replacement lock with me, but it wasn't needed as the electrical connector was unplugged
. The window was stuck shut, but a little pushing down with my hand whilst pressing down the window switch freed it off. All window runners now treated with silicone spray and working smoothly.
Last job required was to replace the drivers lock, which wasn't unlocking using the remote key. Les' stepped up to the job and did this tricky job for me.
Sunday - arrived to see various Nano members sheltering from the rain. With nothing better to do I joined them. Subsequently I was privileged to see how may people could change a bonnet without getting in each others way - well done those men!
Finally, using some of the knowledge I gained last Saturday, this morning I helped a friend do the spy hole mod to his tourer.