Page 1 of 4

List jobs to be done/offers of help at June Nano Meet here

PostPosted: Mon May 20, 2019 7:46 pm
by Rob
Please record below any jobs you intend to tackle at the Nano Meet, and if you are attending and available to help any fellow owners please also post your offer on here so you can link up at the meet.

T4 is usually present both days (to be confirmed for free diagnostics checks - please read the T4 dislaimer thread: viewtopic.php?f=65&t=214

Re: List jobs to be done/offers of help at June Nano Meet he

PostPosted: Tue May 21, 2019 8:06 am
by AndyN01
Hi all,

Apologies for not making the May meeting.

I'll be there on Saturday to polish up those dull headlights.

Please let me know if you'd like something done as there's only so many hours in the day so i can only do a limited number.

See you then.

Andy.

Re: List jobs to be done/offers of help at June Nano Meet he

PostPosted: Wed May 22, 2019 12:21 pm
by Bogbrush82
Still would like to ge my HK sub fitted to the car (got the HK amp and speakers already installed) but finding a HK + Hi-line wiring loom is proving almost impossible. :(

Leak off kit + new impact driver will be available.

Re: List jobs to be done/offers of help at June Nano Meet he

PostPosted: Wed May 22, 2019 1:53 pm
by ditto
Hi All, my headlights need a polish as they must be close to an m o t fail, so i'll be there on the Saturday, may need some help removing bumper, see you there Andy, Joe, Red ZT.

Re: List jobs to be done/offers of help at June Nano Meet he

PostPosted: Wed May 22, 2019 5:19 pm
by Rob
Bogbrush82 wrote:Still would like to ge my HK sub fitted to the car (got the HK amp and speakers already installed) but finding a HK + Hi-line wiring loom is proving almost impossible. :(

Leak off kit + new impact driver will be available.



If you still have your FBH and want too bring it we can take it away and test it on our workbench to make sure it works before fitting, and you can collect it back anytime to suit from Norton Canes after the meet

Re: List jobs to be done/offers of help at June Nano Meet he

PostPosted: Wed May 22, 2019 6:37 pm
by Bogbrush82
Rob wrote:
Bogbrush82 wrote:Still would like to ge my HK sub fitted to the car (got the HK amp and speakers already installed) but finding a HK + Hi-line wiring loom is proving almost impossible. :(

Leak off kit + new impact driver will be available.



If you still have your FBH and want too bring it we can take it away and test it on our workbench to make sure it works before fitting, and you can collect it back anytime to suit from Norton Canes after the meet


That'd be fantastic, thanks. :)

Re: List jobs to be done/offers of help at June Nano Meet he

PostPosted: Thu May 23, 2019 11:25 pm
by Mike2000
My joblist for the 22nd:
Headlights polished please.
Fit tyre protectors.
Get some advice on sorting out the heater matrix so my passenger doesn't complain about the cold.
Try to sort out the wet boot - I think it's the rear windscreen seal.

Edit - I can't make the 22nd now, but will be there for the 23rd

Re: List jobs to be done/offers of help at June Nano Meet he

PostPosted: Fri May 24, 2019 10:50 am
by Steve1304
Here's my list but any off the list would be great as it's my long term list.

Headlights, hydromount,srs light,intercooler pipe,got a new bonnet to fit and my rear blind.

Looking forward to catching up with everyone

Re: List jobs to be done/offers of help at June Nano Meet he

PostPosted: Fri May 24, 2019 10:51 am
by Steve1304
Mike2000 wrote:My joblist for the 22nd:
Headlights polished please.
Fit tyre protectors.
Get some advice on sorting out the heater matrix so my passenger doesn't complain about the cold.
Try to sort out the wet boot - I think it's the rear windscreen seal.


I will bring the stuff that solved my boot leak, finally solved mine a few months ago

Re: List jobs to be done/offers of help at June Nano Meet he

PostPosted: Sat May 25, 2019 11:01 am
by ARCTIC
Steve1304 wrote:Here's my list but any off the list would be great as it's my long term list.

Headlights, hydromount,srs light,intercooler pipe,got a new bonnet to fit and my rear blind.

Looking forward to catching up with everyone


Hi Steve.
I am sure you will get a few of those done, rear blind try and get hold of John ( Mischief ) bonnet you will need at least four of you and takes about 30 minutes, intercooler pipe we already know will need cutting a good hack saw with a new blade is required, Andy for your head light cleaning so bumper off asap, hydramount is a maybe special tol required also engine as to be jacked up a few engine supports removed, srs is maybe a wire T4 will pin point :thumb: