Page 1 of 5

List jobs to be done/offers of help at October Meet here

PostPosted: Thu Sep 19, 2019 8:13 pm
by Rob
Please record below any jobs you intend to tackle at the Nano Meet, and if you are attending and available to help any fellow owners please also post your offer on here so you can link up at the meet.

T4 is usually present both days (to be confirmed for free diagnostics checks - please read the T4 dislaimer thread: viewtopic.php?f=65&t=214

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Fri Sep 20, 2019 8:15 pm
by Bogbrush82
Could somebody look at Bones for me to see why the fan isn't working? Would also like a T4 if possible to see if it can tell me why she's so thirsty.

Injector leak off test and impact driver will be available as usual.

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Fri Sep 20, 2019 11:35 pm
by ARCTIC
[quote="Bogbrush82"
]Could somebody look at Bones for me to see why the fan isn't working?
Would also like a T4 if possible to see if it can tell me why she's so thirsty.

Injector leak off test and impact driver will be available as usual.[/quote]

David.
Have you done the demist test, if so and the low speed is not working, then it will most likely be the brushes, unless it as a silver resistor, I will bring a 1.8 fan with me so we can get bumper off and do some tests.

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Sat Sep 21, 2019 12:19 pm
by Bogbrush82
Cheers. :thumb:

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Sat Sep 21, 2019 4:16 pm
by sewerman
Think an FBH check is needed as i decided to check it today and its trys to work and stops [LOUDLY CRYING FACE]

Sent from my SM-G950F using Tapatalk

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Sat Sep 21, 2019 8:38 pm
by ARCTIC
sewerman wrote:Think an FBH check is needed as i decided to check it today and its trys to work and stops [LOUDLY CRYING FACE]

Sent from my SM-G950F using Tapatalk


Scott yes best get that sorted before the big freeze in late October early November, I have also sent you a PM :thumb:

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Sat Sep 21, 2019 9:36 pm
by Rob
Scott we will sort your FBH out no problem

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Mon Sep 23, 2019 12:33 pm
by ARCTIC
Here is a possible job owner may want to do before the wet winter months set in, come and ask me for them at the Nano they are (FOC ) only one set per person until they run out.




I have sorted out the inner wing plenum drain filters for our cars, these stop debris ie leaves etc getting into the lower plenum chamber which in turn can block the plenum drain tube under the ECM, which then lets water rise and can damage the ECM.

Remember these have to be asked for they are (FOC) one set per car only, and very easy to fit cheers Arctic

Image1

Image2

Image3

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Mon Sep 23, 2019 1:15 pm
by jamie
I will be able to program new keys in for anyone that needs them at the meet, I will have 5 complete keys with me (plus extra transponders on their own if that is all that is required). If you need a key please PM me prior to the meet and we can discuss the options.

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Mon Sep 23, 2019 2:54 pm
by lochlan
Hello its lochlan here i have a couple of problems 1 is a bulb warning light but all bulbs seem fine and 2 the radiator fan not working my mate ARTIC said he would check out