Please post jobs required and any offfers of help here

[Rob]

Please post jobs required and offers of help here as it will be useful to know what demand there is for jobs to be done so we can see what numbers are involved, and help can be managed, please post if you are able to offer help in any way

[BL52KRZ]

Had a word with Steve(Arctic) about a grommet for the washer bottle. If he has got one , I will take the front bumper off and see if it is the grommet that has given up the ghost and is leaking. Will take the Waxoyle with me so I can spread a bit around any points that need covering. John is going to have an Arctic engineered handbrake stretch proof link fitted.

[ARCTIC]

Had a word with Steve(Arctic) about a grommet for the washer bottle. If he has got one , I will take the front bumper off and see if it is the grommet that has given up the ghost and is leaking. Will take the Waxoyle with me so I can spread a bit around any points that need covering. John is going to have an Arctic engineered handbrake stretch proof link fitted.[/quote

]

HI Dave.
Yes i have found the filter grommet and also have Johns SSC ready, i have also got to fit a starter motor for Martin, so looks like ill be busy which suits me fine.

[Bermudan 75]

Does anyone have a torque wrench that I could borrow?

I need to tighten up the hub nuts and these are rated at 210 nm for the rear and 350 nm for the front.

My torque wrench is not up to the job.

Thanks

Mike

[Duncan]

Does anyone have a torque wrench that I could borrow?

I need to tighten up the hub nuts and these are rated at 210 nm for the rear and 350 nm for the front.

My torque wrench is not up to the job.

Thanks

Mike

You will need a spacialised one to get to 350Nm, or you could consider a torque multiplier.

[MikeHermes]

Arctic, you look busy as normal, but hoping you will be able to bring along an exchange injector for 1951 engine, 2002, as we discussed at the last meet. Hope to do a lot of the work myself. Will bring tools.
Hope to get retest on T4. Will try and get there early, coming from Tewkesbury.
Happy to advise others and help out if I have time.

Will have Unipart rear brake discs for Rover 75 (Tourer, same for saloon?) 1999-2004, for sale £40, if Arctic won't take them in exchange for injector

[Duncan]

Arctic, you look busy as normal, but hoping you will be able to bring along an exchange injector for 1951 engine, 2002, as we discussed at the last meet. Hope to do a lot of the work myself. Will bring tools.
Hope to get retest on T4. Will try and get there early, coming from Tewkesbury.
Happy to advise others and help out if I have time.

Will have Unipart rear brake discs for Rover 75 (Tourer, same for saloon?) 1999-2004, for sale £40, if Arctic won't take them in exchange for injector

The T4 will be there. As usual, we will run a list so get your name on it when you arrive.

[ARCTIC]

Arctic, you look busy as normal, but hoping you will be able to bring along an exchange injector for 1951 engine, 2002, as we discussed at the last meet. Hope to do a lot of the work myself. Will bring tools.

Hope to get retest on T4. Will try and get there early, coming from Tewkesbury.
Happy to advise others and help out if I have time.

Will have Unipart rear brake discs for Rover 75 (Tourer, same for saloon?) 1999-2004, for sale £40, if Arctic won't take them in exchange for injector

Hi Mike.
Good job you reminded me as i had forgot, so will seek one out later, brake discs no good to me, i have no Rover now, but i do have rear discs the same as you it would be best to remove the injector while the engine is warm see you all tomorrow.

PS have you done a leak back test on the injectors so you know which one or more are leaking ?

[Bermudan 75]

Got my act together, my torque wrench will do the rear hub nuts.

I have a torque wrench being delivered Monday that will handle the front hub nuts.