The weekend I sorted out a few of the Nano parts that I carry with me, so if you are attending the nano meet and require a intercooler bend with Viton rings please ask, they are FOC so are the plenum spy hole mod trays, header tank cap again with Viton O-rings.
![Image](https://i.imgur.com/LOh73Jfl.jpg)
1
![Image](https://i.imgur.com/q4OmCErl.jpg)
2
![Image](https://i.imgur.com/nO2D2JZl.jpg)
3
I will also this year carry some sponge leaf catchers for the inner wings.
![Image](https://i.imgur.com/DTdven7l.jpg)
4
Inline stats please PM or drop me a message via the nano forum.
![Image](https://i.imgur.com/gtLEGAZl.jpg)
5
PCV filters.
![Image](https://i.imgur.com/GLkzFcVl.jpg)
6
Gold resistors
![Image](https://i.imgur.com/csTkYYRl.jpg)
7
Manifold EGR/MAP sensor X 3 only so a PM is a must.
![Image](https://i.imgur.com/PYmu9RMl.jpg)
8
A couple of V6 1.8 powerflex mounts
![Image](https://i.imgur.com/DUMjE57l.jpg)
9
Front bumper stainless steel kits.
![Image](https://i.imgur.com/ipgyzJKl.jpg)
10
Ultimate under tray fixings
![Image](https://i.imgur.com/iIPEv10l.jpg)
11
There will also be the usual nut bolts, heat shrink, interior door handles, car loom wiring various, I have quite a few door locks, window lifters, etc in the boxes by the tent or one of the caravans.