Midlands Nano Meets

Duncan wrote:They don't have Electronic stability, but traction control is an option on V6 and diesel..

Thank you Duncan

I think my MOT tester has got confused with this light thinking it is Electronic Stability
Will have to go back and see if I can have a chat with him about it
I don't think traction control is in MOT
Worse case scenario if I can't fix it would you be able to disable traction control with T4
Then I can take it off for MOT
All the best
Glen

Rob wrote:You could try the traders on the owners club to see if anyone has an actuator , or e bay , it's the same one as fitted to an e39 BMW I believe

Thank's Rob
Will have a hunt around for one

All the best
Glen

Could I get a T4 done on both my Rover's please. Just to find if anything is wrong. Many thanks Dek

derek v wrote:Could I get a T4 done on both my Rover's please. Just to find if anything is wrong. Many thanks Dek[/quote

]

Hi Derek.
That should be fine, once you arrive and notice the T4 white board is out put down your name and the reg of your car, you will then be called or found when it is your turn cheers Arctic.

I've got a few jobs I'm going to tackle but the one I will need a lot of help with is finishing my premium bumper installation by refitting the headlamp washers. This means marking and cutting suitable mounting holes.

Will be attending both days,need to have complete seat set changed. Short of breath and iffy knees,so will not be of much help.

jackatesme wrote:Will be attending both days,need to have complete seat set changed. Short of breath and iffy knees,so will not be of much help. [/quote

]

Hi john.
You will be in the capable hands of Mr Devlish & Mr Trebor ( Steve & Rob ) as i am informed that they too are going to take care of your old seats, so they can be reused to help restore Steve's front seat and i am sure the rest will also be recycled Arctic.

Coming up on the Saturday. Would be pleased to detail anybody's dirty engine bay, will bring all the stuff needed as per last year.

Got a whole of of things I would like help with - retro-fit headlight power wash (holes will need drilling), hard-wiring of dash-cam. retro-fit auto dimming rear-view mirror, fit USB charging plug. Jim

Hi Rob ... if its OK at some point I wonder if you can help me with fbh please? Can help with seats ... and maybe headlight washer hole cutting? Somewhere I have some measurements & hole sizes... Bernard?

Are the headlamp wash measurements for a facelift bumper? Could with those so I ca get round to mine.