Midlands Nano Meets

Please record below any jobs you intend to tackle at the Nano Meet, and if you are attending and available to help any fellow owners please also post your offer on here so you can link up at the meet.

T4 is usually present both days (to be confirmed ) for free diagnostics checks - please read the T4 dislaimer thread: viewtopic.php?f=65&t=214

Would Duncan be able to fix the diagnostic port on my car? The pins are damaged and it won't talk to the T4.

Bogbrush82 wrote:Would Duncan be able to fix the diagnostic port on my car? The pins are damaged and it won't talk to the T4.

HI David
How did they get damaged as your car been on Toaf and the wrong plug been used, as I have heard of one damaging a car before also it damaged two Virtual t4 laptops?

Replace faulty two speed fan with refurbed one as arranged.

I think that describing myself as doing the job may be a touch far fetched as I don't know anything about cars but am only to happy to help and learn and also fetch, carry and provide muscle for anyone else who needs a spare spanner hander overer.

Cheers.

ARCTIC wrote:

Bogbrush82 wrote:Would Duncan be able to fix the diagnostic port on my car? The pins are damaged and it won't talk to the T4.

HI David
How did they get damaged as your car been on Toaf and the wrong plug been used, as I have heard of one damaging a car before also it damaged two Virtual t4 laptops?

I think the previous owner may have taken it to a cowboy, since TOAF couldn't read it either. They've been pushed back I think.

Bendrick wrote:Replace faulty two speed fan with refurbed one as arranged.

I think that describing myself as doing the job may be a touch far fetched as I don't know anything about cars but am only to happy to help and learn and also fetch, carry and provide muscle for anyone else who needs a spare spanner hander overer.

Cheers.

Hi Kevin.
Once we have fitted the fan together you should know a little more about how it works and is fitted we can also check for any other jobs that are worth doing when the bumper & slam panel is off, I have allocated 13.30 pm -14.00pm as time for staring, a couple or so hours later we should be done cheers Arctic.

Great, thanks very much.

Well I am all sorted for the next meet, over the last couple of days I have managed to get organised with the plenum trays, I am really surprised how many were changed at the last meet 10 altogether I thought everyone had one of these by now have made up 3 PCV filters, 6 intercooler pipe bends with Viton O-rings, couple of gold resistors, 4 ultimate under tray fixings, 4 coolant caps with Viton O-rings, 3 inline stats, 5 SSC compensators, one of each fans 1.8, 2.0, 2.5, & tow diesel fans one four wires 3 speed, one two wire 2 speed with gold resistor already spoken for, three 80mm Shannon tubes, two 70mm Shannon tubes, nuts, bolts, plastic scrivets 6 interior door handles. Arctic.

Hi, I have an air bag light illuminated, I've tried the under seat connectors without success, would a T4 session point me in the right direction? If so do I book on the day? Thanks Jim

Yes Jim a T4 will tell you , book on the day by putting your name and car reg the whiteboard in the events shelter which is the T4 area , and the check ups are done in order , we usually have T4 there both days and hope to confirm if one will be present over the next few days