Midlands Nano Meets

Hi well if I've got it clean enough I'll be fitting the new inlet manifold to the ZT

Other thing looks like the rear brake calliper is sticking so got to get a new one, if any one has any hose clamps I could borrow would be appreciated

And as always will be available to help were I can

Scott

sewerman wrote:Hi well if I've got it clean enough I'll be fitting the new inlet manifold to the ZT

Other thing looks like the rear brake calliper is sticking so got to get a new one, if any one has any hose clamps I could borrow would be appreciated

And as always will be available to help were I can

Scott[/quote

]

HI Scott.
I should have my hose clamps with me, don't forget to clean the EGR as well if you have not got a bypass one, also clean the MAP sensor when you take off the manifold, bring a few old rags with you.

ARCTIC wrote:

sewerman wrote:Hi well if I've got it clean enough I'll be fitting the new inlet manifold to the ZT

Other thing looks like the rear brake calliper is sticking so got to get a new one, if any one has any hose clamps I could borrow would be appreciated

And as always will be available to help were I can

Scott[/quote

]

HI Scott.
I should have my hose clamps with me, don't forget to clean the EGR as well if you have not got a bypass one, also clean the MAP sensor when you take off the manifold, bring a few old rags with you.

Thanks Steve, should have a caliper ready for the nano.

MAP & EGR cleaned already , just the manifold to finish cleaning if I get time .



Sent from my SM-T530 using Tapatalk

Could I ask another favour? My parking sensors have suddenly stopped working. Would someone be willing to look at them for me?

Cheers.

sewerman wrote:

ARCTIC wrote:

sewerman wrote:Hi well if I've got it clean enough I'll be fitting the new inlet manifold to the ZT

Other thing looks like the rear brake calliper is sticking so got to get a new one, if any one has any hose clamps I could borrow would be appreciated

And as always will be available to help were I can

Scott[/quote

]

HI Scott.
I should have my hose clamps with me, don't forget to clean the EGR as well if you have not got a bypass one, also clean the MAP sensor when you take off the manifold, bring a few old rags with you.

Thanks Steve, should have a caliper ready for the nano.

MAP & EGR cleaned already , just the manifold to finish cleaning if I get time .



Sent from my SM-T530 using Tapatalk

well had a good look over the weekend and looks like the rubber boot had come of the piston so might by why it's dragging, can't get it to go back on so will change it and the wheel bearing is grumbling too so might as well do that as well. On the plus side the back plate look good.

just hope the weather's good

Sent from my SM-G950F using Tapatalk

would like a t4 session please

kevrevmgztt190+ wrote:would like a t4 session please

Hi Kevin.
Sorry to say no T4 at this meet the operators can not make it but may well do at the July meet.

Not so much a list of jobs needed, but to give away parts.

I had to sadly scrap my 1.8 75 Tourer as it just became too expensive to keep going. I have a few bits and pieces left which i am more than happy to give away to anyone that can make any use of them providing nobody buys (on ebay) them before the day

I have the light units, a nearly new cassette deck, Gearbox (89000 miles), cat, radiator and air con stuff, plus other little bits and pieces. Would be a pity to throw them away.

I'm more than happy to drop them down if anybody wants them, probably on Sunday providing you dont mind a Rover 25 in the car park

Thanks

Sundancer

Hoping to get my VIS motors checked?

sundancer wrote:Not so much a list of jobs needed, but to give away parts.

I had to sadly scrap my 1.8 75 Tourer as it just became too expensive to keep going. I have a few bits and pieces left which i am more than happy to give away to anyone that can make any use of them providing nobody buys (on ebay) them before the day

I have the light units, a nearly new cassette deck, Gearbox (89000 miles), cat, radiator and air con stuff, plus other little bits and pieces. Would be a pity to throw them away.

I'm more than happy to drop them down if anybody wants them, probably on Sunday providing you dont mind a Rover 25 in the car park

Thanks

Sundancer

Nowt wrong with a 25 - Had one for a couple of years as my first car. Great fun.