Page 4 of 5

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Sun Oct 13, 2019 2:22 pm
by sewerman
Hi Ray be good to see you again, not done any of the jobs your looking at myself but sure someone has.

Regarding the sill I think you got away with that hole most would have failed it ! As for repairs to it Tom Hobbs is the man , but I believe he's booked till Easter, he did my ZT and it's perfect. He'll spray it too if you supply a rattle can and waxyoil the chassis if you supply that too

His contact details are on his web site http://www.tjhobbs.com/contact.html]

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Mon Oct 14, 2019 3:23 pm
by Roderick87
Hi Scott, thanks, good to see you have earned your stripes. Yes I'm aware of Tom Hobbs, he is a long way from Hereford though, but do have some local places I will talk to. One I have already seen has an entire Jensen Interceptor being stripped down and restored. He looks promising. Should see you Sunday.
Ray

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Wed Oct 16, 2019 4:26 pm
by dattrike
dattrike wrote:Could do with the leak back check as still having a long crank to start the car.



Go it sorted today, changed the injectors for the four from the donor car I bought for the number plate :thumb:
Starts straight away now and sounds much better :thumb:

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Wed Oct 16, 2019 10:05 pm
by ARCTIC
dattrike wrote:
dattrike wrote:Could do with the leak back check as still having a long crank to start the car.



Go it sorted today, changed the injectors for the four from the donor car I bought for the number plate :thumb:
Starts straight away now and sounds much better :thumb:


HI Dave
Did you change all four because you could not find out which one or more were leaking, if so it will be hard now to know which of the removed injectors is at fault, so personally I would strip them all down and clean them, maybe changing a few shims if you need to, nice to hear you got it sorted though.

rear brake carrier bolts

PostPosted: Thu Oct 17, 2019 7:59 am
by derek v
Hi Guys has anybody got 4 spare housing carrier bolts spare. On the drivers side rear they are rounded off so need to change them
Dek

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Thu Oct 17, 2019 9:55 am
by dattrike
ARCTIC wrote:

HI Dave
Did you change all four because you could not find out which one or more were leaking, if so it will be hard now to know which of the removed injectors is at fault, so personally I would strip them all down and clean them, maybe changing a few shims if you need to, nice to hear you got it sorted though.



Hi Steve,
I couldn't rely on the car to start so changed all four because I knew the donor car ones were ok. I was having to use easy start nearly every time I used the car. I'll bring them with me Saturday and donate them if you'd like them.

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Thu Oct 17, 2019 2:36 pm
by Roderick87
Last year when going to attend but then didn't, I had a couple of Avon ZV7 15" tyres, which a guy called Andy001 (I think) was interested in. Well I still have them and will bring on Sunday if anyone is interested. They are used but still got loads of tread on them, as replaced them very early in their life for 4 new All Season tyres. I would if possible like £30 for the pair but will haggle!
Let me know and I'll put them in the boot. They've been stored indoors.
Ray

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Thu Oct 17, 2019 10:58 pm
by ARCTIC
dattrike wrote:
ARCTIC wrote:

HI Dave
Did you change all four because you could not find out which one or more were leaking, if so it will be hard now to know which of the removed injectors is at fault, so personally I would strip them all down and clean them, maybe changing a few shims if you need to, nice to hear you got it sorted though.



Hi Steve,
I couldn't rely on the car to start so changed all four because I knew the donor car ones were ok. I was having to use easy start nearly every time I used the car. I'll bring them with me Saturday and donate them if you'd like them.


Hi Dave yes that would be good gives me something to do in the shed over the winter months, I have a few projects :thumb: & have a little area set up for injectors & HPFP cleaning, replacing the seals etc, keeping the shims & jets in stainless steel bowls :cheers:

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Fri Oct 18, 2019 4:37 pm
by woolleysox
Free to collect from Nano meet set of ZT-T door cards :union: :cheers

Please advise if you want them I will only take them if someone asks for them can also be collected from
Birmingham by arrangement


Rob

Re: List jobs to be done/offers of help at October Meet here

PostPosted: Fri Oct 18, 2019 7:10 pm
by sewerman
I've got a pair of reflector headlights FOC near side is ok off side has 2 broken fittings but their ideal to practice polishing on before you do it for real. They'll be in a box Infront of my car :clap: